paroc Hvac Section AluCoat T
paroc Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.
2024-08-14
Insulation of bends
Follow these instructions to insulate pipe bends:
Cut segment from the section.
Apply the segments on the bend and tape the joints.
Apply paroc Hvac Bend AluCoat T on the straight pipe.
Continue the pipe insulation.
Insulation of T-joints and covering of insulation ends
Cut the sections to fit.
Tape the joints.
Cover the insulation ends with end flange.
Secure the end flange with galvanized wire.
Follow these instructions to insulate straight pipes:
Clean the surface carefully.
Remove the release paper and put pressure on the tape with a spatula.
In order to secure the installation, additional fasteners are required.
Put galvanized wire around the section.
Lock the wire. Three wires per section are needed.
Spiral winding of the galvanized wire. Lock the wire one time per section.
There are different plastic or metallic bands available that can be used.
Three bands per section are recommended. Do not apply the bands with too much force, since the facing might break.
Put the tape around the section.
Use the “tapelock” method where the tape is fastened glue against glue.
Fold the tape so that the glue side is attached to the facing.
For cold installations where the facing is used as a vapour barrier,
you need to tape all circumferential joints with joint with suitable alutape.
Use the “tapelock” method where the tape is fastened glue against glue.
Fold the tape so that the glue side is attached to the facing.
